The tilt adjustment feature enables users to adjust the flash head's position for optimal lighting. There is also a built-in LCD display that provides information such as the flash mode, power levels, and battery life. The approximate recycling time is 2.2 seconds. Me? I bought two so I can use them in the configurations I’ve shown here, and as a master-slave setup if I have an issue with a trigger. Set both flashes to the same channel and group. This allows them to automatically match power when you make a change.

Godox TT350o 2.4G HSS 1/8000s TTL GN36 Camera Flash Speedlite Godox TT350o 2.4G HSS 1/8000s TTL GN36 Camera Flash Speedlite

When you first turn the flash on it is in TTL mode. It means that the flash is ready to fire and set its power automatically, based on the information sent by the camera. This only works if the flash model is compatible with your camera. If your flashes are marked for, let’s say Canon, and you have a Nikon camera, TTL will not work.The M group in Master dictates what the flash does on-camera. Press Mode to switch between flash off, TTL and Manual. My recommendation is if you want it as an on-camera flash, don't hesitate. If you want it as an on-camera transmitter, consider getting an X1T-O or wait for the XPro-O. If you want it only as an off-camera slave, I'd recommend a TT600 instead, because it's cheaper and has more power and because Idon't have HSS issues with it. But. YMMV.

GODOX TT350O 2.4GHz TTL SpeedLite for Olympus / Panasonic

The battery compartment is pretty straightforward, except it only holds two AA batteries, which gives you a big hint about its power output (spoiler: it’s not super powerful, but it’s great). Any stand will do, even the cheap Photo-R stands . I find Neewer to be great value for money, although in the studio I prefer using C-Stands even with speedlights. Master and Slave

My old 433MHz R1 triggers always worked perfectly - though they don't support TTL - so these will be my Plan B for high-interference situations until the R2 can be made to work properly and reliably with all my GX7's AF modes. Most of us who do off-camera flash with speedlights do so because of the Strobist. It's mostly about cost and convenience, and starting out with what you have. A lot of us already had a speedlight in the bag. And a speedlight can be used both on and off camera. The portability of working with speedlights is the other advantage to weigh against the much lower power and smaller size of the light. When using Godox 2.4G wireless X system, TT350 series are perfectly compatible with other products of our company. As a master unit, TT350 series can control the following slave unit models: AD600, AD600M, AD360II, AD200, etc. As a slave unit, TT350 series can be controlled the following master unit models: X1, V860II, V850II TT685, TT600, etc.

TT350o-Product-GODOX Photo Equipment Co.,Ltd.

Interesting. It's pretty clear the X1T is all around a better transmitter unit to use than the TT350. As an on-camera transmitter with TT600 units as slaves, everything works perfectly. Remote power control and HSS are flawless. However, as a YN-622 user, I note that there's no remote zoom control, and no setting groups into MULTI mode remotely.

These are cheap enough that I bought both. I generally carry the TT350 unless I know I'll be in a situation that requires the additional power. The 350 is also supplied with a diffuser, which the 685 does not have. Switching the TT350 to manual mode is pretty easy. Just press the Mode button once and the screen now displays an M at the top and the current power setting at the left of the screen, in the form of a fraction, so that 1/1 is full power. The flash can be zoomed to the desired coverage, and it’s pretty simple to change. Press the Zoom button once and then turn the wheel. Turning it to the right zooms the flash in, decreasing coverage. Turning the wheel to the left zooms the flash out, increasing the coverage. If you turn the wheel all the way to the left you’ll see the AU option, which allows the flash to set the zoom automatically, based on the lens on the camera. This is one of those compatible camera-only functions. Off-Camera As I mentioned in the Godox TT685, there’s one important consideration when using radio frequency systems: they are, usually, not compatible with each other. If you have Godox flashes, they can only be triggered with a Godox Master, but not a Yongnuo or Nissin or Canon transmitter. Summary